$500

What is a turnstile controller?

The turnstile controller from Mairs is the core component and important part of the turnstile gate, which uses microprocessor technology to control various electrical components and drive motors of the turnstile gate. It is mainly used on various pedestrian turnstile gates to realize the safety management of people in and out. Through setting, it can realize the normal opening and normal closing of two-way and one-way passages. It can adjust the effective passage time, has the counting function, and has the function of a power failure and rod dropping at the same time.

Functions of turnstile controller

1. It has a clear traffic direction indication function, which indicates that it is passable in the form of intuitive LED light indication It is still forbidden to pass (another direction light board is required).

2. Anti-tailing function: automatically cancel the passage time after each passage to prevent personnel from anti-tailing.

3. It has a variety of working modes to choose from, for example, one-way traffic and two-way traffic, which can be set through the mainboard menu.

4. With automatic reset function: when the traveler does not pass within the specified time after receiving the gate opening signal, the system will automatically cancel the traveler’s access authority, and the limited access time can be set in the mainboard menu.

5. It has the function of power off and rod dropping at the same time to meet the special needs of users.

6. It has an LCD display function and can describe the turnstile gate operation in intuitive words.

7. It has an intelligent voice prompt function.

8 It has an RS232 serial port communication function, and the turnstile gate opening can be controlled through an RS232 serial port.2

The interface of turnstile controller

The turnstile controller includes a control interface, motor interface, light interface, infrared interface, and other interfaces;

Control interface: it is used to connect the identity identification device of the pedestrian turnstile gate. The common interface is the dry contact interface. Some boards also have an RS232 serial port and RS485 interface

Motor interface: used to connect the motor of the turnstile gate;

LED light interface is used to connect the indicator light of the turnstile gate;

Infrared interface: infrared switch used to connect the turnstile gate; Generally, there are left infrared, right infrared, and anti-pinch infrared.

Power interface; The power interface is used to connect the switching power supply of the turnstile gate.

Battery interface; The battery interface is used to connect the battery of the turnstile gate; The turnstile controller is also used to control the battery to supply power when the switching power supply is detected to be powered off. As batteries are sensitive products in international transportation, supercapacitors are used for export goods.

Coding interface; The coding interface is used to connect the motor.

Clutch interface; The clutch interface is used to connect the motor. The coding circuit is used to connect the coding interface; The clutch circuit is used to connect the clutch interface.

Voice interface; The voice interface is used to connect the voice prompt device of the turnstile gate; The turnstile controller is also used to control the voice prompt device to send the first voice message according to the gate opening instruction, and controlling the voice prompt device to send a second voice message when the gate is closed.

Fire interface: it is used to connect the fire alarm system. In case of an emergency, it can automatically alarm and open the gate.

Online interface: the interface used to connect the host and auxiliary computers. Generally, it includes a network port

Extension interface: at least one extension interface.